Step By Step Guide To Building A Carport

Published on by Metal Carports Direct


Are you planning to build your own carport in order to safeguard your vehicle? If yes, you need to know about certain things prior to building custom metal carports . Well, it is not too tough to design your own carport, but it is not too easy. So, you have to get information from a well-known manufacturer, as he knows the value of your money and time. And he will also give you detailed information or guidelines on building a carport at home quickly. 

Here, you will learn how to build a carport at home. Let's have a look at the step-to-step guide.

Get Permission

You may not be aware it that some locations need planning permission. If your area is one of them, you need to get permission from higher authorities in order to build carports at your place. You need to tell them for what purpose you are going to build this, also what type of carport you need.


It would be best if you cleared, for what purpose, you are building a carport at your home. If you have a single car, you need to go with a single carport. And in case you have more than two vehicles, go with a double carport. Prior to building a carport, you have to clear your purpose. Besides, you must think of the material, such as what type of material you need for a carport. 

Prepare The Ground

Indeed, this is the primary step to build a carport. You have to prepare the place where you want to create a carport. First of all, try to check gas, power lines, and plumbing pipes. It would be best if you protected them while labeling the ground. If needed, spread some sand on location to level-up. 

Pour Concrete in Holes And Attach Beams

After labeling the ground, dig holes in order to pour concrete. This is necessary to support anchor bolts and carport. For this, mix concrete and cement in the same proportion and then pour it into holes. To attach the beam properly, you need first to break and then tighten to the posts, horizontally placed at the exterior of the carriage such that the beam tops are level with the tops of the posts. Align beams to the frame's front and back and connect bolts.

Prepare a Roof

Measure the gutter and mount it to the right beam to balance the length of the lower portion of the carport—relation of the down spring to the closest drain of stormwater. Join shingles. Stick wooden parts to protect from elements using a paintbrush.

Steel Carport Building

Metal carports can be easier to install and less costly than wooden carports, but they cannot be as sedate as they are. You will not start by digging a pit and raised poles, but by building a metal frame, starting by adding the base pipes along the ground for any portable carport or car canopies built from glued steel or other metals. Mount and connect the edge and roof panels


To be informed of the latest articles, subscribe:
Comment on this post